FALCON

All-in-one

The FALCON solution combines innovative functions that have never been seen together in one device.

​

• the triaxial wireless sensor performs synchronous vibration measurements in all directions

• built-in strobe lamp for measuring rotational speed

• built-in laser pyrometer for bearing temperature measurement

• built-in camera to identify the machine, position the sensor and illustrate the report

• built-in Accurex™ automatic diagnosis

• 4 analog channels for synchronized measurements on top of the trigger input

Accurex™ automatic diagnosis

With FALCON you can immediately enjoy the benefits of condition based maintenance: ACCUREX ™ automatic diagnosis works immediately after the first measurement. The identified defects are available to the machine and are thus at the disposal of the operator (bearing lubrication, temperature control ...), allowing the optimization of the maintenance process.

In accordance with ISO 10816 and the result of more than 30 years of ONEPROD experience, FALCON's built-in automatic diagnosis module provides unparalleled relevant and reliable results. Clearly identified machine indicators provide an overall risk assessment to help the user improve the analysis of critical machines. Any defect found is accurately and reliably displayed on the machine (patent pending).

Automatic measurement setup

FALCON is available to everyone. What was once tedious is now of great simplicity, as the configuration is performed based on a simple description of the machine's kinematics via the built-in display. Any rotating machine can now be set up in less than 2 minutes. All required vibration measurements are here: ISO 10816 speed, overall acceleration, Bearing Defect Factor™, high FFT resolution and time waveform and additional custom parameters can be run in a few clicks across the database. Building a database has never been easier!

Productivity measurement

The tri-axial wireless sensor and real-time processing capabilities dramatically reduce the time of vibration measurements: 8 seconds per bearing to measure the X,Y and Z directions with the highest quality vibration data configuration. Using the photos, identifying the machine has never been easier: the user navigates on the color touchscreen from the full view of the plant to the photo of the sensor position on the machine.

​

FALCON minimizes the time and costs required for interventions in the field. The usefulness of FALCON stands out when installed in a plant.

Reliable by design

FALCON is designed for industrial use without compromise in the harshest environments:

​

• ATEX Zone 2

• IP65

• withstands a fall height of 1m20.

The FALCON has a wide colored touch screen that can be used even with safety gloves, with a rubber grip for easy handling and is shock resistant. The lack of a cable allows the operator to work safely within a radius of 10 to 20 meters between the wireless sensor and the equipment. Measurements can be made within protective structures or through a door. The user no longer needs to be near the machine in a hot environment.

Unparalleled communication

FALCON includes all communication modes:

​

• wireless WIFI communication with the tri-axial vibration sensor

• upload/download data via USB, Ethernet, Internet, standard WiFi protocol

• remote route exchange via email

• Cloud access to the hosted platform ONEPROD

FALCON transmits collected data and the vibration analysis tools data to the conditional maintenance platform equipped with the powerful NEST software, so that the data is automatically stored, analyzed and published in reports.